HP Surestore E Tape Library Model 2/20 Setting Up Your HP SureStore E Tape Lib - Page 1

hp surestore tape library 2/20, 4/40, 6/60 setting up your library Library Accessories Depending on the configuration, the following accessories may be shipped with the library. Contact your support or service representative to obtain additional parts. SCSI Interface Cable(s): Four-meter SCSI cable(s) with 68-pin connectors. SCSI Terminator(s): 68-pin SCSI terminator (HVDS or LVDS) to terminate the SCSI chain. Fibre Channel Cable: Optical short-wave cable that connects the Fibre Channel card to the host, hub, or switch (for Fibre Channel configurations). Fibre Channel GBIC: Connects the Fibre Channel cable to the host, hub, or switch (for standard performance Fibre Channel controllers only). SCSI Jumper Cable(s): 68-pin cable that connects the library controller or Fibre Channel card to a drive. Tape Cartridges: Cartridges included for data backup. Cleaning Cartridge: Cleaning cartridge to be used when cleaning the drive. Power Cord(s): Localized power cord(s) included with the library. ® User's Guide: Describes installation, operation, and troubleshooting information. Installation Poster: Provides an overview on installing and configuring the library, as well as additional information on support. Trim Brackets (field rack only): Aligns the library to the depth of the rack. Host Interface Card: Install into the host system as needed for your configuration. Bar Code Label Kit: Bar code labels for data and cleaning cartridges, and reordering information.