HP Surestore Tape Library Model 20/700 HP Tape Library Configuration Guide - Page 12
Verifying the, Installation
![]() |
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Verifying the Installation Confirm that the communications path to the robotics controller is functional: 1. Compile the SCSI I/O test program: cc /usr/contrib/src/scsi_io.c. -o/usr/contrib/ bin/scsi_io 2. Run the SCSI I/O test program, using the device file created during installation. For example, if the device file name is /dev/ rmt/HPA1234, the command would be: /usr/contrib/bin/scsi_io /dev/scsi/HPA1234 If the robotics is correctly configured, the following appears: the thing claims to be: HP C7200-8000 NOTE HP C7200-8000 is used only as an example. The actual ioscan output will reflect the product number and firmware revision of the library you are configuring. 10 Configuring the Host System
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-220-hp-tape-library-configuration-guide-61dd88f/12.png)
10
Configuring the Host System
Verifying the
Installation
Confirm that the communications path to the robotics controller is
functional:
1.
Compile the SCSI I/O test program:
cc /usr/contrib/src/scsi_io.c. -o/usr/contrib/
bin/scsi_io
2.
Run the SCSI I/O test program, using the device file created
during installation. For example, if the device file name is
/dev/
rmt/HPA1234
, the command would be:
/usr/contrib/bin/scsi_io /dev/scsi/HPA1234
If the robotics is correctly configured, the following appears:
the thing claims to be: HP C7200-8000
NOTE
HP C7200-8000 is used only as an example. The actual
ioscan output will reflect the product number and firmware
revision of the library you are configuring.