HP T5725 Hardware Reference Guide HP Compaq t5720/t5725 Thin Client - Page 15
Removing and replacing the chassis cover
UPC - 882780693333
View all HP T5725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Hardware upgrades Removing and replacing the chassis cover To install internal hardware, you must remove the chassis cover as shown in the following procedures. Å WARNING: Before removing the chassis cover, ensure that the thin client is turned off and the power cord is disconnected from the electrical outlet. 1. Remove the two screws that secure the cover to the chassis 1. 2. Slide the cover about 1/2-inch toward the back of the unit, and then lift the cover off the chassis 2. 3. Disconnect the speaker cable 3 from the system board. Removing the chassis cover and disconnecting the speaker To replace the chassis cover, reverse the previous procedure. Hardware Reference Guide www.hp.com 2-3
Hardware Reference Guide
www.hp.com
2-3
Hardware upgrades
Removing and replacing the chassis cover
To install internal hardware, you must remove the chassis cover as
shown in the following procedures.
Å
WARNING:
Before removing the chassis cover, ensure that the thin
client is turned off and the power cord is disconnected from the electrical
outlet.
1. Remove the two screws that secure the cover to the chassis
1
.
2. Slide the cover about 1/2-inch toward the back of the unit, and
then lift the cover off the chassis
2
.
3. Disconnect the speaker cable
3
from the system board.
Removing the chassis cover and disconnecting the speaker
To replace the chassis cover, reverse the previous procedure.