HP V14 User Guide - Page 12

and follow the on-screen instructions to locate and download, following sources

Page 12 highlights

3. Turn on power to the monitor. 4. After installing the software and connecting the monitor, the following icon appears in the system tray: Click the icon to open the menu to select your display mode and control the attached monitor. If the monitor does not turn on, perform the following steps: 1. Be sure that the USB cable is seated properly in the monitor and the computer. If the cable is connected to USB 2.0 ports on the computer, make sure both USB connectors of the "Y" cable are connected to USB 2.0 ports on the computer. 2. Press the power button on the rear of the monitor. 3. Be sure the USB Graphics driver has been installed on the PC. Install the drivers using one of the following sources: ● Go to http://www.hp.com/support and follow the on-screen instructions to locate and download the drivers for the monitor. NOTE: This source provides the most up-to-date drivers. 8 Chapter 3 Setting up and using the monitor

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

3.
Turn on power to the monitor.
4.
After installing the software and connecting the monitor, the following icon appears in the system tray:
Click the icon to open the menu to select your display mode and control the attached monitor.
1.
Be sure that the USB cable is seated properly in the monitor and the computer. If the cable is connected
to USB 2.0 ports on the computer, make sure both USB connectors of the “Y” cable are connected to USB
2.0 ports on the computer.
2.
Press the power button on the rear of the monitor.
3.
Be sure the USB Graphics driver has been installed on the PC. Install the drivers using one of the
following sources:
Go to
and follow the on-screen instructions to locate and download
the drivers for the monitor.
NOTE:
This source provides the most up-to-date drivers.
8
Chapter 3
Setting up and using the monitor
If the monitor does not turn on, perform the
following steps: