HP VL600 HP Vectra VL600, D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter - Page 11

Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 5 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT Requirements 4.0 Workstation Operating System Driver Version Driver File Server OS Client OS Windows NT 4.0 Workstation 4.22.1 Dlkpci.sys Novell NetWare 5.0 Server Client v4.6 for Windows NT Procedure 1 With the HP Vectra turned off, install the network adapter into an PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows NT. 4 Log into Windows NT with administrator privileges. 5 The following steps are based on a first-time installation of Networking on the system. Adding a NIC to a previously installed Networking has some minor differences. Ask your administrator for more information. 6 Open the "Network Properties" windows and agree to install "Windows NT Networking". 7 With "Wired to the Network" checked, click on "Next". 8 Click on the option to "Select from list..." then on "Have Disk...". 9 Insert the driver disk and click on "OK". 10 With "D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)" highlighted, click on "OK". 11 With the "D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)" listed in the "Network Adapters:" window, click on "Next". 12 Select all the applicable network protocols and click on "Next". 9