HP VL600 HP Vectra VL600, D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter - Page 17
Microsoft Windows 98, edition
View all HP VL600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2nd edition 8 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 Requirements 2nd edition Operating System Driver Version Driver File Server OS Client OS Windows 98 2nd edition 5.01 Dc21x4.sys Novell NetWare 5.0 Server Client v3.1 for Windows 95/98 Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows 98. 4 Windows 98 will detect the network adapter as an "Intel 21140 based 10/ 100 mpbs Ethernet Controller" during startup and will load its internal driver. Note that the adapter detected as an "Intel 21140..." is normal. 5 Click on "Next" to continue installation. 6 Accept the default selection: "Search for the best driver for your device (Recommended)." and click "Next". 7 Select the locations Windows 98 will search for drivers. Accept the default selection: "Floppy disk drives" and click "Next". 8 Accept "The updated driver (Recommended)..." by clicking on "Next". 9 Click on "Next" to install the driver. 10 Click on "Finish" when the driver installation is complete. 11 Click on "Yes" to restart the system. 12 After restarting the system, additional changes in the network properties, such as: workgroup name, computer name, etc. may be necessary. Ask your Network Administrator for more information. Restart the system if changes are made. 15