HP Vectra VE 5/xx HP Vectra VL/VE 5/xx Series 3 PC - Familiarization Guide - Page 47
Using SETUP to Con the PC
View all HP Vectra VE 5/xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using SETUP to Configure the PC Field Name Date Time User Preferences Processor Computer speed Coprocessor Memory Size Purpose To set date and time Allows you to set: User Password (Vectra VL) Password (vectra VE) Keyclick volume Character repeat speed Auto repeat delay Numlock on/off at power up Shows the type of processor in the PC. Shows the computer speed. Shows the tpye of coprocessor in the PC. State the memory size of: Base, on system board Reserved Extended Total Options YYYY/MM/DD HH:MM:SS Set/Not set Set/Not set 0 to 10 2 - 30 per second 0.25 - 1 second On/Off Memory Cache Power Management Standby Sleep At Hard Disk Drives Drive 1 Drive 2 Interface SCSI BIOS ROM Address SCSI BIOS Shadowing Controls level-one and level-two memory cache. On/Off Enable or disable "Standby" mode. Enable or disable the "Sleep At" power management feature. On/Off On/Off Allows you to configure the primary and secondary hard disk drives. To define if t he integrated IDE controller is used for the IDE hard disk drive. View the SCSIBIOS ROM address for an HP SCSI adapter. To shadow the SCSI BIOS inf aster RAM for HP SCSI adapters. None or SCSI Custom Enabled/Disabled Enabled/None Enabled/Disabled Remarks Automatically detected. Confirm that SETUP has detected and configured the memory size fields. Ensure that the TOTAL field is correct. For maximum performance set to On. Shows capacity of the hard disk drive if one was detected. Configure any controller board according to its manual. VL5/xx & VE5/xx Familiarization Guide Troubleshooting and Repair • 47