HP Vectra VEi8 HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In
HP Vectra VEi8 Manual
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Vectra VEi8 manual content summary:
- HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 1
IBM Token-Ring 16/4 PCI Wake On LAN Adapter Installation Guide - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 2
of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. MMXTM is a trademark of Intel Corporation. Pentium® is a registered - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 3
Wake Up is supported only on Win 95 • PnP OS settings: before installing LAN card, go into Bios setup and set PnP OS to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards. ISA cards - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 4
under Win 95 on VLi8 only • On VLi8, LAN cards cause an IRQ conflict with the embedded sound de- vice under Win95. • To solve the problem: Reserve IRQ 5 and sett PNP OS to no. For this: 1 Install the NIC then power up the system 2 Press F2 to go to CMOS setup - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 5
Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 6
NT 3.51 Server 7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click "OK". 8 Remove the IBM diskette from the floppy drive and click on "YES" to restart the system when prompted. 9 Right-click on the "Network Neighborhood" icon and select "Properties". 10 Accept the default - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 7
Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 8
2 Installing the IBM Token-Ring 16/4 PCI Wake On LAN Adapter Connecting to a Windows NT 4.0 Server 8 Remove the IBM diskette from the floppy drive and click on "YES" to restart the system when prompted. 9 Right-click on the "Network Neighborhood" icon and select "Properties". 10 Accept the default - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 9
3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 10
Server 7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click "OK". 8 Remove the IBM diskette from the floppy drive and click on 14 Click on "Yes" to set the Preferred Server. (If you do not have the required information, contact your network administrator). 15 Click on "Reboot - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 11
4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 9 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 12
7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click "OK". 8 Remove the IBM diskette from the floppy drive and click on Click on "Yes" to set the Preferred Tree, Server, etc. (If you do not have the required information, contact your network administrator). 15 Click on " - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 13
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 14
" at the prompt to shut down and restart your computer for the new settings to take effect. 22 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 23 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 15
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 16
" at the prompt to shut down and restart your computer for the new settings to take effect. 22 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 23 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 17
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 18
have the required information). 13 At the "Network Services:" prompt, accept default settings and click on "Next". 14 Click on "Next" to continue the network card installation. 15 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 19
NetWare 3.12 Server 28 Click on the "Login" tab and specify your Name and Password to login. 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 20
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11B installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 21
have the required information). 13 At the "Network Services:" prompt, accept default settings and click on "Next". 14 Click on "Next" to continue the network card installation. 15 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 22
NetWare 4.11 Server 28 Click on the "Login" tab and specify your Name and Password to login. 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 23
NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS transfer protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 24
"IBM PCI Token Ring Adapter Driver" in the "Select OEM Option" dialog box, and click "OK". 12 Accept the default settings in the IBM PCI Token Ring Adapter dialog box by clicking "OK". 13 Choose the appropriate network protocols by clicking the check boxes in the "Windows NT Setup" dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 25
Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 26
"IBM PCI Token Ring Adapter Driver" in the "Select OEM Option" dialog box, and click "OK". 12 Accept the default settings in the IBM PCI Token Ring Adapter dialog box by clicking "OK". 13 Choose the appropriate network protocols by clicking the check boxes in the "Windows NT Setup" dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 27
3.51 Service Pack 5 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 28
"IBM PCI Token Ring Adapter Driver" in the "Select OEM Option" dialog box, and click "OK". 12 Accept the default settings in the IBM PCI Token Ring Adapter dialog box by clicking "OK". 13 Choose the appropriate network protocols by clicking the check boxes in the "Windows NT Setup" dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 29
Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 30
to a Microsoft Windows NT4.0 Server 8 Type the path "A:\WFW" in the "Install Driver" dialog box, and then insert the IBM "PCI Token Ring Adapter NDIS Driver disk into the floppy drive, and click "OK". 9 Select "IBM PCI Token-Ring Adaper, NDIS2/3" in the "Unlisted or Updated Network Adapter" dialog - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 31
11 Server system that supports IPX network protocol. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 09 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 32
"IBM PCI Token Ring Adapter" and hit "Enter". 10 Accept the default network board settings and press "F10" to save it. 11 Select option 6 "Highlight here driver disk from the floppy drive and press to restart the system. 13 You may login to a server from the DOS prompt or load Windows - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 33
- HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 34
IBM Token-Ring 16/4 PCI Wake On
LAN Adapter
Installation Guide