HP Vectra VEi8 HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 15
Microsoft Windows NT, 0 Workstation, Connecting to a, Windows NT 4.0 Server, Requirements, Device
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6 Installing the IBM Token-Ring 16/4 Wake On LAN PCI Adapter Microsoft Windows NT 4.0 Workstation 6 Installing the IBM Token-Ring 16/4 Wake On LAN PCI Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT4.0 Workstation. • IBM Token-Ring 16/4 PCI Wake On LAN card and drivers disk version 2.10. • Driver File: IBMTRP.SYS, version 2.22 • Microsoft Windows NT4.0 Workstation media. • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the IBM Token Ring PCI adapter card into a PCI slot. 2 Connect network cable media to the IBM Token Ring card. 3 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 4 Right-click on the "Network Neighborhood" icon and select "Properties". 5 Click on "Yes" when prompted to install Windows NT Networking. 6 Select "Wired to the network" and click on "Next". 7 Click on the "Select from list..." button and then the "Have Disk..." button.