HP Vectra VEi8 HP Vectra VEi7, IBM Token-Ring 16/4 PCI Wake On LAN Adapter, In - Page 29
Microsoft Windows for, Workgroups 3.11, Connecting to a, Microsoft Windows, NT4.0 Server,
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
12 Installing the IBM Token-Ring 16/4 PCI Wake On LAN Adapter Microsoft Windows for Workgroups 3.11 12 Installing the IBM Token-Ring 16/4 PCI Wake On LAN Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Microsoft Windows NT4.0 Server Requirements • HP Vectra with Windows for Workgroup 3.11 • IBM Token-Ring 16/4 PCI Wake On LAN adapter and driver disk version 2.10. • Driver File: IBMTRP.386, version 3.11.3 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the IBM Token Ring PCI adapter card into a PCI slot. 2 Connect network cable media to the IBM Token Ring card. 3 After Windows loads, open the "NETWORK" Program Group, and doubleclick on "Network Setup". 4 Click on the "Networks" button in the "Network Setup" dialog box. 5 Click on the "Install Microsoft Windows Network:" option, and click "OK". 6 Click on the "Drivers" button from the "Network Setup" dialog box, and click on "Add Adapter". 7 Click "OK" to accept the default choice of "Unlisted or Updated Network Adapter".