HP Vectra VL800 hp vectra vl800, Madge Smart 16/4 PCI Ringnode MK3 (51-04), in - Page 4
Connecting to a Novell NetWare 5.1 or 4.11 Server - motherboard
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connecting to a Novell NetWare 5.1 or 4.11 Server Microsoft Windows NT 4.0 Workstation Requirements Operating System Driver Version Driver File Server OS Client OS Windows NT 4.0 Workstation 6.04 MDGNDIS4.SYS NetWare 5.1 or 4.11 Server Client v4.80 for Windows NT/2000 Procedure 1. With the HP Vectra turned off, install the network adapter into an available PCI slot. 2. Connect the network cable to the newly installed network adapter. 3. Connect the WOL cable between the network adapter and the PC motherboard. 4. Power on the machine and boot to Windows. 5. Logon to Windows with administrator privileges. 6. Click OK to ignore the warning message indicating a driver failed during system startup. This is caused the removal of the previously installed network adapter. This message should no longer appear after removing the driver from the Network properties. 7. The following steps are based on a subsequent installation of Networking on the system. Adding a network adapter for the first time has some minor differences. Ask your administrator for more information. 8. Open the Network properties windows to remove a previously installed network adapter and to add a new one. 9. Click on the "Adapters" tab and highlight the network adapter you want removed then click on the "Remove" button. 10. Click on the "Adapters" tab then on the "Add" button. 11. Insert the driver disk and click on "Have Disk". 12. Type in the location of the NDIS4 drivers and click on "OK". 13. With "Madge Automated Installation - RECOMMENDED" highlighted, click on "OK".