HP Visualize J7000 hp Visualize J5000, J7000 workstations owner's guide (a5991 - Page 105
DDS3 Tape Drive LED Display Codes, LED Warning Conditions, Self-Test Failure, Caution
View all HP Visualize J7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Figure 5-2 Using Your Digital Data Storage (DDS) Tape Drive DDS Tape Drive and Cassette Descriptions DDS3 Tape Drive LED Display Codes Left Right (green) (amber) LED LED No power Cartridge loaded; no activity Cartridge loaded; activity Loading/unloading/ejecting/power-on Self-test failed No cartridge; caution (cleaning required) Cartridge loaded; caution (cleaning required) Cartidge loaded; drive active; caution (cleaning required) Cartridge loading/unloading; caution (cleaning required) CD Mode "warbling" Legend: Off On Flashing (4Hz) Flashing (2Hz) LED Warning Conditions The following sections describe actions to take if the LEDs indicate a warning condition. Self-Test Failure If the LEDs display the self-test (failure) signal, a fault was diagnosed during the self tests. Note the pattern of the pulses and contact your local service representative. Caution Hewlett-Packard DDS drives continually monitor the number of errors they have to correct when reading and writing to a tape to determine tape wear and tape-head cleanliness. If excessive tape wear or dirty tape heads are suspected, the drive warns you by displaying the Caution signal on the LED indicators. Chapter 5 105