HP Visualize J7000 hp Visualize J5000, J7000 workstations owner's guide (a5991 - Page 77
Inserting a Disk Drive
View all HP Visualize J7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
NOTE Hot-Pluggable Hard Disk Drives The Disk Drives Inserting a Disk Drive To insert a drive, the procedure is virtually identical to the "removing" steps above, except in the reverse order: 1. Carefully push the drive, which is already in its tray, straight into the desired slot, making sure the drive-tray's handle is pulled away from the front surface of the tray. 2. When the drive-tray's handle can engage the hooks on the left edge of the slot, push the right end of the handle flush to the front of the drive; this will seat the drive into its power and data connections. When the handle gets flush to the front of the tray, it should engage the retaining tab with a noticeable click. The drive tray will not go all the way into the slot if the handle has already been folded flat against the front of the tray. Push the drive tray into the slot firmly, and then push the handle flat against the front of the tray. Chapter 3 77