HP Workstation zx6000 HP Graphics Administration Guide for HP-UX 11.X (IPF ver - Page 57

configuring an X Server on HP-UX ATI Radeon™ 7000, Manager Processor and rx5670 graphics solution device-dependent information supported visuals There are two visuals available with the ATI Radeon7000 display, although not at the same time. The X server can be either in depth 8 or depth 24 frame buffer mode. In depth 24 mode the available visual is TrueColor. This is the recommended visual. In depth 8 mode the available visual is PseudoColor. The frame buffer depth is configurable through HP's System Administration Manager (SAM). Visuals Supported by ATI Radeon7000 Class Depth Layer PseudoColor 8 Overlay TrueColor 24 Image supported device options Supported Device Options Options Value Default Description NoAccel Boolean False Turn off hardware acceleration SWcursor Boolean False Use software cursor instead of hardware crt_screen Boolean False Use only crt, no digital flat panel PanelSize Integer None Flat panel size override UseFBDev Boolean False Use simple frame buffer device driver supported monitor configurations The following table documents supported display resolution and refresh rate for the ATI Radeon7000. Check the monitor's specification to determine which resolutions and frequencies are supported by the monitor. Supported Monitor Configurations Resolution (HxV) Frequency (Hz) Description 1024x768 75 VESA standard 1024x768 85 VESA standard 1280x1024 60 VESA standard, Flat Panel 1280x1024 75 VESA standard 1280x1024 85 VESA standard Graphics Administration Guide 4-45