HP XP20000/XP24000 HP StorageWorks SN6000 Fibre Channel Switch release notes ( - Page 6

• Four 8-Gb HP StorageWorks 81Q PCI Express HBAs (PCI-e x8 physical connector) • Four low-profile HBA mounting brackets • One standard power cord • One HP Power Distribution Unit (PDU) power cable • One serial cable Products supported H-series switches support the following storage arrays: • HP StorageWorks MSA1000 (active/active failover only-firmware 7.x or later) • HP StorageWorks MSA1500 (active/active failover only-firmware 6.x or later) • HP StorageWorks MSA2000fc • HP StorageWorks MSA2000fc G2 (with MSA23xxfc G2 controllers) • HP StorageWorks P2000 G3 FC Modular Smart Array System • HP StorageWorks EVA4000, EVA6000, EVA8000 • HP StorageWorks EVA4100, EVA6100, EVA8100 • HP StorageWorks EVA4400 • HP StorageWorks EVA6400, EVA8400 • HP StorageWorks XP20000/24000 • HP StorageWorks XP10000/12000 The H-series switches support the following backup solutions: • MSL6000 with LTO4 drives • MSL2024, MSL4048, and MSL8096 with LTO4 drives • EML-e Series with LTO4 drives • VLS6000, VLS9000 • VLS12000 EVA Gateway For the latest support information, see the HP StorageWorks SAN Design Reference Guide available at the HP website http://www.hp.com/go/sandesignguide. For the latest information about supported devices, see the HP Single Point of Connectivity Knowledge (SPOCK) website http://www.hp.com/storage/spock. You must sign up for an HP Passport to enable access. Under Other Hardware, select Switches, and then select H-series FC Switch Connectivity Stream. Operating systems The following operating systems are supported with H-series switches: • Microsoft Windows Server 2008 • Microsoft Windows Server 2008 Hyper-V • Microsoft Windows Server 2003 • Microsoft Windows Storage Server 2003 • VMware ESX • Red Hat Enterprise Linux (RHEL) • SUSE Linux Enterprise Server (SLES) • HP-UX 6