HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide - Page 13
continued, Description, Extension SNMP, Apply, Contact, Modify, Location, System Group, Trap Test
![]() |
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 6 SNMP Information Tab (continued) Item System Group Trap Test Apply Cancel Description Allows you to add, delete or change SNMP system group information. If system group information has already been registered, the registered information displays. To register the system group information, the Extension SNMP check box must be selected. When you register system group information, select Apply. System group information is as follows: • Name: Connected storage system name. Remote Web Console users can change the device name. You can use up to 180 alphanumeric characters for a device name. You cannot use the following You can use a space in the middle of the device name, but not before and after and a space before or after the device name. The device name is required to use SNMP Agent. Make sure to document the device name, because settings will be cleared when SVP is replaced. • Contact: Contact information such as personnel and telephone numbers where you can inquire about the connected storage system. Remote Web Console users can change contact information in Modify mode. Enter contact information using up to 180 alphanumeric characters (ASCII codes), except for some symbols, such as and %. You can also use a space, except before and after contact information. A contact name is required to use SNMP Agent. Make sure to document the contact name, because settings will be cleared when SVP is replaced. • Location: Location of connected storage system. Remote Web Console users can change device locations with the modify mode. You must enter a device location using up to 180 alphanumeric characters (ASCII codes). You can use a space, except for before and after the location. You cannot use some symbols, such as and %. The device location is required to use SNMP Agent. Make sure to document the device location, because the settings will be cleared when SVP is replaced. Executes test report of the trap to the community registered in the disk storage system. Operation in Modify mode is required to use this button. Operation authority is required as well. Implements settings made on this window. Cancels settings made on this window. SNMP Information Tab 13
![](/manual_guide/products/hewlettpackard-xp20000xp24000-hp-storageworks-xp24000xp20000-snmp-agent-reference-guide-ae13196088-2011-12bd816/13.png)