HP Xw6600 HP xw and Z Series Workstations - Front fan and fan holder installat - Page 4
Caution,
 |
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
5. Lower the front fan holder and fan assembly into the chassis and snap it into place. Ensure cables are routed properly to avoid damage to the cables. CAUTION: Clamping a cable between the card guide and the chassis might damage the cable. Figure 1 Routing the cables 6. Plug the front fan connector into the front chassis fan header on the system board. NOTE: To locate system board components, see the service label on the side access panel. Table 2 Installing the front fan and fan holder HP xw4000 Workstation series HP xw6000 Workstation series HP 400 Workstations HP xw9300 Workstations 4 Front fan and fan holder installation ENWW
-
1 -
2 -
3 -
4 -
5
 |
 |
5.
Lower the front fan holder and fan assembly into the chassis and snap it into place. Ensure cables
are routed properly to avoid damage to the cables.
CAUTION:
Clamping a cable between the card guide and the chassis might damage the cable.
Figure 1
Routing the cables
6.
Plug the front fan connector into the front chassis fan header on the system board.
NOTE:
To locate system board components, see the service label on the side access panel.
Table 2
Installing the front fan and fan holder
HP xw4000 Workstation series
HP
400 Workstations
HP xw6000 Workstation series
HP xw9300 Workstations
4
Front fan and fan holder installation
ENWW