HP Xw6600 HP xw Workstation series - LSI 8344 8-port SAS RAID controller card
HP Xw6600 - Workstation - 2 GB RAM Manual
 |
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw6600 manual content summary:
- HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 1
in your workstation. Kit contents This kit includes the following components: Table 1 Kit contents Kit Contents 8-port SAS RAID controller card Data cable with 90-degree connectors CD with software drivers and manufacturer's documentation Hard disk drive activity LED cable Installation instructions - HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 2
from a hot component, enable the surface to cool power from the equipment by unplugging the power cord from the electrical outlet. WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation : HP accessories are for use in HP Workstation products - HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 3
cover. References Your workstation documentation includes instructions for disassembling and preparing the workstation for installation. For product-specific information, see the Service and Technical Reference Guide for your HP workstation at http://www.hp.com/support/workstation_manuals. ENWW - HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 4
port SAS RAID controller card. Procedure: installing the 8-port SAS RAID controller card To install the card: Step Action 1 Release the PCI . Refer to the service label on the access panel of your workstation to identify the PCI slots. 4 LSI 8344 8-port SAS RAID controller card installation Antenna - HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 5
Step Action 3 Attach the SAS adapter supplied with the HP workstation SAS hard drive to the data connector on the rear of the SAS hard drive. 4 In preparation for cable connection, identify the 8-port controller card connectors. The LED cable connector (1), the internal data connector (2), and the - HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 6
the hard drive activity LED cable to the 8-port SAS RAID controller card (1). Attach the other end of the hard drive activity LED cable to the hard drive LED activity connector on the system board (2). (An HP xw6000 series workstation system board is shown below for reference.) NOTE: See the service - HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 7
the 8-port SAS RAID controller card, use the instructions in your workstation documentation to reassemble the workstation. Reassembly includes reinstalling the side access panel and restoring power to the workstation. Step 4-Loading and setting up driver software For instructions on loading and - HP Xw6600 | HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 8
8 LSI 8344 8-port SAS RAID controller card installation Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/ ENWW
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
LSI 8344 8-port SAS RAID controller card
installation
Overview
Introduction
This document describes how to install the LSI 8344 8-port SAS RAID controller card in your workstation.
Kit contents
This kit includes the following components:
Table 1
Kit contents
Kit Contents
8-port SAS RAID controller card
Data cable with 90-degree connectors
CD with software drivers and manufacturer's documentation
Hard disk drive activity LED cable
Installation instructions
Warranty
Tools required
No tools are required for this assembly.
© 2008 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered
trademark of Hewlett-Packard Development Company, L.P. Printed in the U.S.
ENWW
Overview
1
Antenna House XSL Formatter (Evaluation)