HP Xw6600 HP xw Workstation series - LSI 8344 8-port SAS RAID controller card - Page 3
Step 1—Preparing the workstation, Introduction, Procedure: preparing the workstation for disassembly
 |
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Step 1-Preparing the workstation Introduction This section describes how to prepare your workstation for disassembly. Procedure: preparing the workstation for disassembly To prepare the workstation for component installation: Step Action 1 Power down the workstation. 2 Disconnect power from the workstation. 3 Open the access cover. References Your workstation documentation includes instructions for disassembling and preparing the workstation for installation. For product-specific information, see the Service and Technical Reference Guide for your HP workstation at http://www.hp.com/support/workstation_manuals. ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/ Step 1-Preparing the workstation 3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Step 1—Preparing the workstation
Introduction
This section describes how to prepare your workstation for disassembly.
Procedure: preparing the workstation for disassembly
To prepare the workstation for component installation:
Step
Action
1
Power down the workstation.
2
Disconnect power from the workstation.
3
Open the access cover.
References
Your workstation documentation includes instructions for disassembling and preparing the workstation
for installation.
For product-specific information, see the
Service and Technical Reference Guide
for your HP
workstation at
support/workstation_manuals
.
ENWW
Step 1—Preparing the workstation
3
Antenna House XSL Formatter (Evaluation)