Home » HP Manuals » Desktops » HP Xw6600 » Manual Viewer

HP Xw6600 Setting up SATA RAID on the HP xw4600, xw6600, and xw8600 Workstatio - Page 2

SATA Emulation mode and eSATA SPEED Setup

UPC - 883585731121

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

2. Using the arrow keys and the Enter key go to "Storage" and then "Storage Options." SATA Emulation mode must be set to "RAID" or "RAID+AHCI" depending on your system, see Figure 1. Make sure press to press the F10 key to accept any changes you make. Figure 1 SATA Emulation mode and eSATA SPEED Setup 2 Setting up SATA RAID on the HP xw4600, xw6600, and xw8600 Workstations ENWW

Section	Page
Setting up SATA RAID on the HP xw4600, xw6600, and xw8600 Workstations	1
Introduction	1
Installing Drives	1
Enabling RAID	1
Configuring the RAID volumes	3
Setting the Boot Order	5

Match case Limit results 1 per page

Using the arrow keys and the Enter key go to “Storage” and then “Storage Options.” SATA

Emulation mode must be set to “RAID” or “RAID+AHCI” depending on your system, see Figure 1.

Make sure press to press the F10 key to accept any changes you make.

Figure 1

SATA Emulation mode and eSATA SPEED Setup

Setting up SATA RAID on the HP xw4600, xw6600, and xw8600 Workstations

ENWW