HP Xw8200 Adaptec SCSI RAID 2120S: Software User's Guide - Page 95
Controller Commands, C{controller_ID}
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Using the Command Line Interface Controller Commands The following commands are used to display the status of a variety of controller attributes and to perform such tasks as pausing and resuming I/O and enabling or disabling automatic failover. Command Summary: controller details Shows details about the open controller and software. controller firmware compare [/C{controller_ID}] [{controller_ID}...] [/D{UFI_file_path}] Compares the contents of each of the flash components on a controller to the corresponding image in user flash image (UFI) files and indicates whether they match. Switches /C{controller_ID}-ID representing the set of controllers on which to perform the firmware comparison. /D{UFI_file_path}-Location of the UFI files. controller firmware save [/C{controller_ID}] [{controller_ID}...] [/D{UFI_file_path}] Saves the contents of a controller's flash in user flash image (UFI) files. Switches /C{controller_ID}-ID representing the set of controllers on which to perform the firmware comparison. /D{UFI_file_path}-Location of the UFI files. controller firmware update [/C{controller_ID}] [{controller_ID}...] [/D{UFI_file_path}] Updates a controller's flash components from the flash image data in a pair of user flash image (UFI) files. Switches /C{controller_ID}-ID representing the set of controllers on which to perform the firmware comparison. /D{UFI_file_path}-Path where the pair of UFI files are located. 4-29