HP Z1 HP Z1 Workstation User Guide - Page 19

Setup procedure, WARNING, - power cords

Get HP Z1 PDF manuals and user guides View all HP Z1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Setup procedure 1. Read the following warnings. It is your responsibility to understand and comply with them. WARNING! The workstation weighs 21.3 kg (47.0 lbs). If you cannot safely lift the workstation, have someone help you remove it from the box. WARNING! To reduce the risk of electric shock or damage to your equipment: - Plug the power cord into an easily accessible, grounded (earthed) three-pin outlet. - Do not disable the power cord grounding pin (for example, by attaching a two-pin adapter). It is an important safety feature. - To disconnect power from the workstation, unplug the power cord from the AC outlet. 2. Carefully remove the workstation from the box and place it on a sturdy, level surface. Remove all plastic packaging. 3. Push down firmly on the workstation to unload the latch in the stand. Figure 3-1 Unload the latch 4. With one hand, grasp the bottom edge of workstation in a way that allows you to press the green button on the stand (1). Grasp the handle at the top of the workstation with your other hand (2). Push the green button and hold it in while you raise the workstation to its maximum horizontal height (3). Figure 3-2 Raise workstation NOTE: Because the workstation is heavy and the stand joints are tight, you may need to exert some force to raise the workstation. Setting up the workstation 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
Setup procedure
1.
Read the following warnings. It is your responsibility to understand and comply with them.
WARNING!
The workstation weighs 21.3 kg (47.0 lbs). If you cannot safely lift the
workstation, have someone help you remove it from the box.
WARNING!
To reduce the risk of electric shock or damage to your equipment:
— Plug the power cord into an easily accessible, grounded (earthed) three-pin outlet.
— Do not disable the power cord grounding pin (for example, by attaching a two-pin adapter). It
is an important safety feature.
— To disconnect power from the workstation, unplug the power cord from the AC outlet.
2.
Carefully remove the workstation from the box and place it on a sturdy, level surface. Remove all
plastic packaging.
3.
Push down firmly on the workstation to unload the latch in the stand.
Figure 3-1
Unload the latch
4.
With one hand, grasp the bottom edge of workstation in a way that allows you to press the green
button on the stand (1). Grasp the handle at the top of the workstation with your other hand (2).
Push the green button and hold it in while you raise the workstation to its maximum horizontal
height (3).
Figure 3-2
Raise workstation
NOTE:
Because the workstation is heavy and the stand joints are tight, you may need to exert
some force to raise the workstation.
Setting up the workstation
11