HP Z200 PCI Express Graphics Card Installation - Page 4
Step 2—Installing the graphics card,
View all HP Z200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Step 2-Installing the graphics card To install the graphics card: NOTE: If the computer has a card guide integrated into the chassis, omit the first step. 1. (Optional) If a card guide was included with the kit, lower it into the chassis and snap it into place. The following figure shows two graphics card guide types. Figure 2 Installing the card guide (Optional) 2. If your computer requires a low profile card, replace the full-height bracket on the card with the supplied low-profile bracket. 3. To install the PCIe graphics expansion card: a. If the PCIe graphics expansion card fits in a card guide, lower the card into the chassis and align the card in the groove of the card guide. NOTE: For long cards, rotate the graphics card bulkhead under the rear chassis lip, and then align the card extender with the card guide, while lowering it into the slot. Figure 3 Aligning and installing a long graphics card b. Verify that the keyed components of the card align with the slot (1). c. Close the expansion slot retention clamp (2). 4 PCI Express graphics card installation ENWW