HP Z2100 HP Designjet Z2100 Printing Guide - Add and profile a new paper type - Page 7
Create and Install ICC Profile > - paper
UPC - 882780654006
View all HP Z2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
• Click Continue. The printer will calibrate itself for use with your paper. The process takes about 10 minutes and consists of the following steps: • A calibration test chart is printed. • The test chart is allowed to dry for a period of time, the amount of time depends on the paper type, this is so that the colors have time to stabilize. • The test chart is scanned and measured using the HP Embedded Spectrophotometer. Create and Install ICC Profile > Once the printer calibration is complete, load your new paper again into the printer (A3/B size). The following message will be displayed prompting for paper if it is not loaded: When you have defined and calibrated a new paper type, the printer creates and automatically installs the new ICC profile, this is to be used with your paper. The process takes about 15-20 minutes and consists of the following steps: 7