HP Z420 LSI SAS RAID Host Bus Adapter installation - Page 10
Step 4-Reassembling the workstation, Step 5-Loading and setting up driver software, Step 6- - drivers
View all HP Z420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step 4-Reassembling the workstation 1. Reinstall the card support, if applicable. 2. Reinstall the side access panel. 3. Reconnect power to the workstation and all external devices. 4. Restore power to the workstation and all external devices. Step 5-Loading and setting up driver software For instructions on loading and setting up the drivers for use with your workstation, see the manufacturer's documentation shipped with the RAID controller card. At the time of component installation, look for device firmware and driver updates, designated for your workstation model and operating system. Obtain updates from http://www.hp.com/go/ workstationsupport. Step 6-Configuring RAID devices For detailed instruction on configuring RAID devices, see the service guide for your HP workstation model at http://www.hp.com/support/workstation_manuals. Additional information is available at http://www.hp.com/support/RAID_FAQs. Japanese 日本語 This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then select your workstation product and select Japanese from the drop down Manual Language menu http://www.hp.com/support/ workstation_manuals Manual Language Japanese 10 LSI SAS RAID Host Bus Adapter installation