HP Z600 HP xw and Z Series Workstations - Installing an HP Solenoid Lock and H - Page 5
Reassembling the computer, Activating the Solenoid Lock, Remote security management - bios power management
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Reassembling the computer 1. Replace the side access panel. 2. Reconnect the power cord to the computer and plug the power cord into a power outlet. Activating the Solenoid Lock NOTE: The Hood Sensor does not require activation. It is recognized and activated automatically by the computer. 1. Turn on or restart the computer. 2. Repeatedly press and release the F10 key until the Computer Setup Utilities menu appears. NOTE: If you do not press the F10 key at the appropriate time, you must turn the computer off, then on again, and press the F10 key again to access Computer Setup. 3. Select Security > Smart Cover > Lock. 4. Before exiting, select File > Save Changes and Exit. Remote security management It is possible to remotely lock and unlock the Solenoid Lock using Remote Access Software. Refer to www.hp.com/go/hpcmi for tools you can use to remotely manage the computer and BIOS settings in a networked environment. ENWW Reassembling the computer 5