HP c3700 hp workstations - HP A7789A Fire GL UX Graphics Card And Software - Page 4
j6700/j6000 Graphics Cards
View all HP c3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
j6700/j6000 Graphics Cards Your j-Class Workstation's PCI (Peripheral Connect Interface) assembly cage has three 64-bit, 4x, 3.3v, 66 MHz card slots, providing I/O expansion capabilities. See Figure 0-1. Use the Primary Graphics Slot for the highest performance graphics card. Use the Secondary Graphics Slot for the second graphics card and the remaining slot for any additional supported card. Figure 0-1 j6700 PCI Card Slot Numbering Primary Graphics Card Slot Secondary Graphics Card Slot NOTE: You will need a T-15 Torx driver or flathead screwdriver to remove the I/O slot bulkhead screws. Here are the steps required to remove a graphics card from your j6700 or j6000 computer. 1. Power down the system, and unplug the power cord from the electrical outlet. 2. Open the side panel of the system unit. See your workstation's User's Guide for detailed instruc-