HP dc72 Hardware Reference Guide - dc7700 SFF - Page 37

Removing an External 3.5-inch Drive, CAUTION,

Get HP dc72 - Blade Workstation Client PDF manuals and user guides View all HP dc72 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

13. Rotate the drive cage back down to its normal position. CAUTION Be careful not to pinch any cables or wires when rotating the drive cage down. Figure 2-22 Rotating the Drive Cage Down 14. Replace the computer cover. 15. If the computer was on a stand, replace the stand. 16. Reconnect the power cord and turn on the computer. 17. Lock any security devices that were disengaged when the computer cover was removed. The system automatically recognizes the drive and reconfigures the computer. Removing an External 3.5-inch Drive CAUTION All removable media should be taken out of a drive before removing the drive from the computer. NOTE The 3.5-inch drive bay may contain a diskette drive or a media card reader. The 3.5-inch drive is located underneath the optical drive. You must remove the optical drive before removing the external 3.5-inch drive. 1. Follow the procedure in the above section, Removing an Optical Drive, to remove the optical drive and access the 3.5-inch drive. CAUTION Ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. After removing the computer cover, look for the LED on the system board between the DIMM sockets. If the LED is illuminated, the system still has power. Turn off the computer and remove the power cord before proceeding. ENWW Installing and Removing Drives 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
13.
Rotate the drive cage back down to its normal position.
CAUTION
Be careful not to pinch any cables or wires when rotating the drive cage down.
Figure 2-22
Rotating the Drive Cage Down
14.
Replace the computer cover.
15.
If the computer was on a stand, replace the stand.
16.
Reconnect the power cord and turn on the computer.
17.
Lock any security devices that were disengaged when the computer cover was removed.
The system automatically recognizes the drive and reconfigures the computer.
Removing an External 3.5-inch Drive
CAUTION
All removable media should be taken out of a drive before removing the drive from
the computer.
NOTE
The 3.5-inch drive bay may contain a diskette drive or a media card reader.
The 3.5-inch drive is located underneath the optical drive. You must remove the optical drive before
removing the external 3.5-inch drive.
1.
Follow the procedure in the above section,
Removing an Optical Drive
, to remove the optical drive
and access the 3.5-inch drive.
CAUTION
Ensure that the computer is turned off and that the power cord is disconnected
from the electrical outlet. After removing the computer cover, look for the LED on the system
board between the DIMM sockets. If the LED is illuminated, the system still has power. Turn
off the computer and remove the power cord before proceeding.
ENWW
Installing and Removing Drives
31