HP dc72 Redundant Array of Independent Disks (RAID) on HP Compaq dc7700 and dx - Page 14
Configuring RAID Option ROM
View all HP dc72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
• To reset to factory settings, select Set Defaults and Exit. This option restores the original factory defaults. CAUTION: Do NOT turn the computer power off while the ROM is saving the F10 Computer Setup changes as the CMOS could become corrupted. Only turn the computer off after exiting the F10 Setup screen. Configuring RAID Option ROM You can only access Computer Setup at system startup. To access the Computer Setup Utilities menu and enable RAID: 1. Turn on or restart the computer by clicking Start > Shut Down > Restart the Computer. 2. Press Ctrl + I repeatedly as soon as the monitor light turns green to enter the RAID configuration util- ity. If you do not press Ctrl + I at the appropriate time, you must restart the computer, and then press Ctrl + I again to access the utility. The Intel Matrix Storage Manager screen (RAID Option ROM) displays briefly during boot up. The RAID configuration utility is English only. To configure RAID in other languages, use the Windowsbased RAID configuration utility. 14