HP dc72 Redundant Array of Independent Disks (RAID) on HP Compaq dc7700 and dx - Page 23
Migration to RAID 0 from two non-RAID hard drives using Intel Matrix Stor, age Console
View all HP dc72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3. After replacing the hard drive, automatic rebuild of the redundancy begins immediately after the system is powered up and operating system starts. The following message appears: Migration to RAID 0 from two non-RAID hard drives using Intel Matrix Storage Console NOTE: The HP Compaq dc7700 and dx7300 Business PC products only support RAID based on two identical SATA hard drives in either RAID 0 or RAID 1 or Matrix Mode of RAID 0 and RAID 1. 1. Open the Intel Matrix Storage Console and select Improve storage performance with RAID 0. 2. Click Actions > Create a RAID 0 volume to open a verification window. 23
23
3.
After replacing the hard drive, automatic rebuild of the redundancy begins immediately after the sys-
tem is powered up and operating system starts. The following message appears:
Migration to RAID 0 from two non-RAID hard drives using Intel Matrix Stor-
age Console
NOTE
: The HP Compaq dc7700 and dx7300 Business PC products only support RAID based on two
identical SATA hard drives in either RAID 0 or RAID 1 or Matrix Mode of RAID 0 and RAID 1.
1.
Open the Intel Matrix Storage Console and select
Improve storage performance with
RAID 0
.
2.
Click
Actions > Create a RAID 0 volume
to open a verification window.