HP dx2040 Hardware Reference Guide - dx2040 Microtower Model - Page 26
Replacing or Upgrading a Drive, Locating Drive Positions
View all HP dx2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Replacing or Upgrading a Drive This section describes the procedure for replacing or upgrading the storage drives. A Torx T-15 or flatblade screwdriver is needed to remove and install the guide screws and retainer screws on a drive. Locating Drive Positions NOTE: The drive configuration shown below may be different than your computer model. Figure 2-10 Drive Positions 1 External 5.25-inch half-height optical drive bay 2 External 5.25-inch half-height option drive bay 3 External 3.5-inch option drive bay (media card reader shown)1 4 Internal 3.5-inch bay for optional secondary hard drive 5 Internal 3.5-inch bay for primary hard drive 1 The external 3.5" option drive bay accommodates a diskette drive or a media card reader. 20 Chapter 2 Hardware Upgrades ENWW