HP dx2200 Hardware Reference Guide - dx 2200MT - Page 21
Device, Retainer Screws, Guide Screws
View all HP dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Hardware Upgrades To install a drive, reverse the removal procedure. Refer to the following table for proper retainer and guide screw locations. Device Retainer Screws Diskette Drive 2 (labeled "FDD" on chassis) Media Card 2 (labeled "CR" on chassis) Reader Guide Screws 1 (front left side of drive) none ✎ If you are installing a drive in the external 3.5" drive bay for the first time, use a flatblade screwdriver to pry out the metal shield covering the bay. ✎ There are a total of eight extra guide/retainer screws on the front of the chassis behind the bezel. Four have 6-32 standard threads and four have M3 metric threads. Standard screws are used for hard drives and have a silver finish. Metric screws are used for all other drives and have a black finish. Be sure to install the appropriate guide screws into the drive. Hardware Reference Guide www.hp.com 1-17