HP dx2708 Service Reference Guide: HP Compaq dx2700 MT/dx2708 MT/dx2700 SFF Bu - Page 39
Remove the computer access panel and front bezel (MT chassis and SFF chassis)
View all HP dx2708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removal and Replacement Procedures- Microtower (MT)/Small Form Factor (SFF) Chassis 6.2 Remove the computer access panel and front bezel (MT chassis and SFF chassis) 6.2.1 Access Panel (MT Chassis) 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). Ä CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 2. Disconnect the power cord from the computer and from the power source 1. 3. Remove the screw that secures the access panel to the computer chassis 2. 4. Slide the access panel back about 10 mm (3/8 inch), then lift it away from and off the unit 3. To replace the access panel, reverse the removal steps. 6-2 431672-001 Service Reference Guide