HP dx2708 Service Reference Guide: HP Compaq dx2700 MT/dx2708 MT/dx2700 SFF Bu - Page 91
Output Mode, Problem, Cause, Solution, Continued
View all HP dx2708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Troubleshooting Without Diagnostics Solving Audio Problems (Continued) Problem Cause Solution Noise or no sound comes out of the speakers or headphones. 1. If using digital speakers that have a stereo jack and want the system to auto-switch to digital, use a stereo-to-mono adapter to properly engage the autosense feature or use the multimedia device properties to manually switch the audio signal from analog to digital. 2. If the headphones have a mono jack, use the multimedia device properties to switch the system to analog out. ✎ If you set digital as the Output Mode, the internal speaker and external analog speakers will no longer output audio until you switch back to an auto-sense or analog mode. If you set analog as the Output Mode, external digital speakers will not function until you change the output mode back to an auto-sense or digital mode. Sound cuts in and out. Computer appears to be locked up while recording audio. Processor resources are being used by other open applications. The hard disk may be full. Shut down all open processorintensive applications. 1. Before recording, make sure there is enough free space on the hard disk. 2. Try recording the audio file in a compressed format. Service Reference Guide 431672-001 D-11