HP dx7300 HP Compaq dx7300 and dc7700 Business PC Technical Reference Guide, 1 - Page 126
Wake-On-LAN, Modem Ring, Power Management Event
View all HP dx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Power and Signal Distribution The wake up sequence for each event occurs as follows: Wake-On-LAN The network interface controller (NIC) can be configured for detection of a "Magic Packet" and wake the system up from sleep mode through the assertion of the PME- signal on the PCI bus. Refer to Chapter 5, "Network Support" for more information. Modem Ring A ring condition on a serial port can be detected by the power control logic and, if so configured, cause the PS On signal to be asserted. Power Management Event A power management event that asserts the PME- signal on the PCI bus can be enabled to cause the power control logic to generate the PS On. Note that the PCI card must be PCI ver. 2.2 (or later) compliant to support this function. 7-6 www.hp.com Technical Reference Guide