HP ep7112 HP ep7100 Series Home Cinema Digital Projector - User's Guide - Page 39

Input menu For a visual aid, see "Back panel" on page 12. Adjusting the projector Input menu Component S-Video Composite DVI Shows the source connected to the component-video port (YPbPr). Shows the source connected to the S-video port. Shows the source connected to the composite-video port. Shows the source connected to the DVI port (available only on certain models). Picture menu Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments are shown in gray in the on-screen menu. Picture menu Color settings... Brightness Contrast Sharpness Color saturation Tint Color space Reset color settings Shape settings... Keystone Reset keystone Widescreen input Adjusts the picture and colors. Brightens or darkens the picture. Sets the difference between light and dark areas. Sharpens or softens the picture. Adjusts the intensity of colors. Shifts colors toward red or green. For certain component inputs, selects the type of color standard used by the source. Restores these color settings to their default settings. Adjusts the shape of the picture. Corrects the slanted sides of the picture. This compensates for a projector that is too high or low relative to the screen. Resets the keystone correction to zero (no correction). Sets whether a widescreen (16:9) input device is in use. Adjusts the height of the picture accordingly. User's Guide 39