HP iPAQ Microportable Projector MP3800 Compaq IPAQ Microportable Projector MP3 - Page 53

Select Save and Return., be displayed as an option in the Main menu.

Get HP iPAQ Microportable Projector MP3800 PDF manuals and user guides View all HP iPAQ Microportable Projector MP3800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Care and Maintenance After the lamp module has been replaced, reset the lamp hours in the on-screen display menu to prevent the "Lamp May Fail Soon. Replacement Suggested" message from appearing again. To reset the lamp hours: 1. Be sure the projector is turned off. 2. Make sure all connections except the power cable are disconnected. 3. Press and hold the Menu button on top of the projector while turning the projector on. 4. Connect the VGA cable to the projector. "Service" will now be displayed as an option in the Main menu. 5. Select Service and press the Menu button on the top of the projector. 6. Select Reset Lamp Hours from the Service menu and press the Menu button. 7. Select Yes from the Confirm Reset menu and press the Menu button. 8. Select Save and Return. Compaq iPAQ Microportable Projector MP3800 User's Guide 7-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Care and Maintenance
Compaq iPAQ Microportable Projector MP3800 User’s Guide
7–5
After the lamp module has been replaced, reset the lamp hours in
the on-screen display menu to prevent the “Lamp May Fail Soon.
Replacement Suggested” message from appearing again. To reset
the lamp hours:
1. Be sure the projector is turned off.
2. Make sure all connections except the power cable are
disconnected.
3. Press and hold the
Menu
button on top of the projector while
turning the projector on.
4. Connect the VGA cable to the projector. “Service”
will now
be displayed as an option in the Main menu.
5. Select Service and press the
Menu
button on the top of the
projector.
6. Select Reset Lamp Hours from the Service menu and press
the
Menu
button.
7. Select Yes from the Confirm Reset menu and press the
Menu
button.
8. Select Save and Return.