HP mp2210 User's Guide - Page 15
Connecting power
View all HP mp2210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting power 1. Place the projector on a stable platform located 1.5 to 10 m (5 to 33 ft) in front of the screen. Ideally, the platform should be lower than the bottom of the screen. 2. Connect one end of the power cord to the back of the projector 1 and the other end to a grounded electrical outlet 2. If you want to permanently install the projector on a table or behind the screen, see "Installing the projector" on page 47. Setting up the projector 15
Setting up the projector
15
Connecting power
1.
Place the projector on a stable platform located 1.5 to 10 m (5 to 33 ft) in front of the
screen. Ideally, the platform should be lower than the bottom of the screen.
2.
Connect one end of the power cord to the back of the projector
1
and the other end to a
grounded electrical outlet
2
.
If you want to permanently install the projector on a table or behind the screen, see “Installing
the projector” on page 47.