HP mp2210 User's Guide - Page 51
Help > Diagnostics, If the projected colors seem slightly wrong - projector troubleshoot
View all HP mp2210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
If an upside-down or reversed image is displayed: • The projector has been set to the wrong position setting. Press enter, go to Setup > Picture orientation, and select the correct setting. If the image is too small or too large: • Adjust the zoom ring on top of the projector. • Move the projector closer to or farther from the screen. • On the projector or remote control, press the picture mode button one or more times to see if one of the picture modes makes the image the correct size. • Press enter, go to Picture > Customize picture mode > Aspect ratio. Try the different settings. • If the source device sends wide-screen output, press enter, go to Input, and try setting Widescreen input to Yes. Otherwise, set it to No. If the image has slanted sides: • As much as possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. • Press enter and go to Quick choice > Keystone. Adjust the setting as needed. If the image is stretched: • On the projector or remote control, press the picture mode button one or more times to see if one of the picture modes makes the image the correct size. • Press enter, go to Picture > Customize picture mode > Aspect ratio. Try the different settings. • If the source device sends wide-screen output, press enter, go to Input, and try setting Widescreen input to Yes. Otherwise, set it to No. If the projected colors seem slightly wrong: • See "Adjusting the picture for best color" on page 34. • Press enter, go to Help > Diagnostics, and run the color test. If the projected colors seem completely wrong: • Be sure the pins on the cable connectors are not bent or broken. • Press enter, go to Picture > Color settings > Color space. Try the different settings. • Press enter, go to Help > Diagnostics, and run the color test. • Press enter, go to Picture > Color settings > Reset color settings, and press enter. • Press enter, go to Setup > Reset all settings, and press enter. Troubleshooting suggestions 51