HP mt40 HP mt40 Mobile Thin Client Maintenance and Service Guide IMPORTANT! Th - Page 43
Memory module, Step 2: Select a Download - software
View all HP mt40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Reverse this procedure to install the RTC battery. Memory module NOTE: Primary and expansion memory is installed in a stacked configuration in the bottom of the computer. Description 4-GB memory module (PC3, 12800, 1600-MHz) Spare part number 641369-001 Update BIOS before adding memory modules Before adding new memory, make sure you update the computer to the latest BIOS. CAUTION: Failure to update the computer to the latest BIOS prior to installing new memory may result in various system problems. To update BIOS: 1. Navigate to www.hp.com. 2. Click Support & Drivers > click Drivers & Software. 3. In the Enter a product name/number box, type the computer model information, and then click Search. 4. Click the link for the computer model. 5. Select the operating system, and then click Next. 6. Under Step 2: Select a Download, click the BIOS link. 7. Click the link for the most recent BIOS. 8. Click the Download button, and then follow the on-screen instructions. Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29). 5. Remove the service cover (see Service cover on page 30). Remove the memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) Component replacement procedures 35