HP nc6140 HP Compaq nc6140 Notebook PC - Maintenance and Service Guide - Page 142
Remove the Mini Card WWAN module, module away from the socket at an angle.
View all HP nc6140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Removal and Replacement Procedures 2. Remove the two Phillips PM2.5×3.0 screws 1 that secure the Mini Card WWAN module to the system board. (The edge of the module opposite the socket rises away from the computer.) 3. Remove the Mini Card WWAN module 2 by pulling the module away from the socket at an angle. ✎ Mini Card WWAN modules are designed with notches 3 to prevent incorrect installation. Removing the Mini Card WWAN Module Reverse the above procedure to install the Mini Card WWAN module. 6-52 Maintenance and Service Guide
6–52
Maintenance and Service Guide
Removal and Replacement Procedures
2.
Remove the two Phillips PM2.5×3.0 screws
1
that secure the
Mini Card WWAN module to the system board. (The edge of
the module opposite the socket rises away from
the computer.)
3. Remove the Mini Card WWAN module
2
by pulling the
module away from the socket at an angle.
✎
Mini Card WWAN modules are designed with notches
3
to
prevent incorrect installation.
Removing the Mini Card WWAN Module
Reverse the above procedure to install the Mini Card
WWAN module.