HP nc6140 HP Compaq nc6140 Notebook PC - Maintenance and Service Guide - Page 152
out of the base, Reverse the above procedures to install the serial connector
View all HP nc6140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Removal and Replacement Procedures 2. Remove the two HM5.0×9.0 screw locks 1 on each side of the serial connector. 3. Lift the serial connector module and cable 2 out of the base enclosure. 4. Disconnect the serial connector module cable 3 from the system board. Removing the Serial Connector Module Reverse the above procedures to install the serial connector module. 6-62 Maintenance and Service Guide
6–62
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the two HM5.0×9.0 screw locks
1
on each side of
the serial connector.
3. Lift the serial connector module and cable
2
out of the base
enclosure.
4. Disconnect the serial connector module cable
3
from the
system board.
Removing the Serial Connector Module
Reverse the above procedures to install the serial connector
module.