HP nx9000 Service Manual - Page 108
Removing the I/R PCA, Reassembly Note, Remove the I/R PCA.
View all HP nx9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
3. Disconnect the I/R PCA cable from the motherboard. 4. Remove the two M2.5×4.0 mm screws that secure the I/R PCA to the bottom case. 5. Remove the I/R PCA. Reassembly Note Figure 2-24. Removing the I/R PCA Caution Use care when handling the I/R PCA cable. Damaging the cable can degrade notebook performance. • Make sure you route the I/R PCA cable between the left screw hole and the bottom case. Service Manual Removal and Replacement 2-37
3.
4.
5.
Disconnect the I/R PCA cable from the motherboard.
Remove the two M2.5µ4.0 mm screws that secure the I/R PCA to the bottom case.
Remove the I/R PCA.
Figure 2-24. Removing the I/R PCA
Reassembly Note
Caution
Use care when handling the I/R PCA cable. Damaging the cable can degrade notebook
performance.
•
Make sure you route the I/R PCA cable between the left screw hole and the bottom case.
Service Manual
Removal and Replacement
2-37