HP p650 HP p650 Digital Camera - User Manual - Page 107
Digital zoom
View all HP p650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Problem Possible Cause and Recommended Action A recorded image was not saved. 1)Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows , charge the battery as soon as possible (page 17). 2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete. Though available lighting is bright, the faces of people in the image are dark. Not enough light is reaching the subjects. Change the flash mode setting to (Forced On) for daylight synchro flash (page 35), or adjust EV Compensation to the + side (page 57). Subjects are too dark when shooting images in a seashore or ski area. Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode setting to (Forced On) for daylight synchro flash (page 35), or adjust EV Compensation to the + side (page 57). Digital zoom (including HD zoom) does not work. The zoom bar indicates zoom only up to a zoom factor of 12.5. Time stamping may be turned on, which will cause digital zoom to be disabled. Turn off time stamping (page 86). The image is out of 1)Focusing may not be possible because the subject is outside focus during movie the focus range. Shoot within the allowable range. recording. 2)The lens may be dirty. Clean the lens (page 96). 106