HP rp3440 Rack to Tower and Tower to Rack System Conversion Guide, Second Edit - Page 24
Installing the System’s Rack Latches, Remove the Pedestal Mounting Screws
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Converting a Tower System to a Rack System Process for Converting Your Tower System to a Rack System Figure 4-6Remove the Pedestal Mounting Screws Slide the pedestal in the direction of the large arrow. Mounting Screws Pedestal Retaining Posts and Slots Step 2. Remove the pedestal from the system's chassis. See Figure 4-7. Figure 4-7Removing the Pedestal Retaining Posts Retaining Slots Installing the System's Rack Latches The rack system has two rack latch brackets for the purpose of securing the system in the rack enclosure. The left bracket has the left front panel attached to it and the right bracket does not. Here are the required steps for installing the rack system's rack latches: Step 1. Insert the left-side rack latch bracket's retaining tab into its retaining slot on the system's chassis. See Figure 4-8. 24 Chapter 4