HP rp4440 Installation Guide, Sixth Edition - HP 9000 rp4410/rp4440 - Page 69
Installing the Duplex Board, Step 3.
View all HP rp4440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 1-37 Installing the Duplex Board Installing the System Installing Additional Components Step 3. Secure the duplex board to the disk drive cage by the bracket and to the SCSI backplane by the SCSI connector sockets. (Figure 1-37) Step 4. Install the SCSI Cable B on the SCSI backplane. (Figure 1-38) a. Release the SCSI Cable B from its stowed position within the chassis. b. Plug the SCSI Cable B connector into the SCSI connector located on the backplane next to the duplex board installed in the previous step. Chapter 1 69
Installing the System
Installing Additional Components
Chapter 1
69
Figure 1-37 Installing the Duplex Board
Step 3.
Secure the duplex board to the disk drive cage by the bracket and to the SCSI backplane by the
SCSI connector sockets. (Figure 1-37)
Step 4.
Install the SCSI Cable B on the SCSI backplane. (Figure 1-38)
a.
Release the SCSI Cable B from its stowed position within the chassis.
b.
Plug the SCSI Cable B connector into the SCSI connector located on the backplane next to the
duplex board installed in the previous step.