HP rp4440 HP DLPI Programmer's Guide - Page 100
DL_HP_GET_64BIT_STATS_REQ, acknowledgement is not pending.
View all HP rp4440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
DLPI Primitives Local Management Primitives The DL_GET_STATISTICS_ACK returns standard mib and optionally extended mib information for all HP supported networking interfaces. It is up to the DLPI user to check the interface-specific field of the Interface MIB to determine whether there is a transmission MIB. DL_HP_GET_64BIT_STATS_REQ Directs the DLS provider to return 64-bit statistics. Format The message consists one M_PROTO message block that contains the following structure: typedef struct{ uint32_t dl_primitive; uint32_t dl_reserved1; uint32_t dl_reserved2; }dl_hp_get_64bit_stats_req_t; Parameters dl_primitive DL_HP_GET_64BIT_STATS_REQ dl_reserved1 Reserved for future use; set to 0. dl_reserved2 Reserved for future use; set to 0. State The message is valid in any attached state in which a local acknowledgement is not pending. New State The resulting state is unchanged. Response The DLS provider responds to the request with DL_HP_GET_64BIT_STATS_ACK if the primitive is supported and successful; otherwise, DL_ERROR_ACK is returned. Reasons for Failure 100 Chapter 2