HP s510 HP s510 Digital Camera - User Manual - Page 58
Setting LCD Save, Setting Date & Time, Setting Language, Setting Display Mode
View all HP s510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Setting LCD Save Enable the LCD Save function to automatically decrease the LCD brightness to conserve battery power. When the camera is idle for 20 seconds, the LCD darkens. Press any button to resume to normal brightness. • The camera is idle and enters LCD Save mode when no buttons are pressed. LCD Save, though enabled, does not function during video playback, slideshow and video recording. Setting Date & Time Use the Date & Time function to set the date and time of your camera. This function is useful in attaching date stamps on captured photos. Your camera uses a 24-hour time format. 1. Press the navigation controls to adjust date and time value. By holding down Up/Down key on the navigation control, the numeric values changes continuously. 2. Press the OK button to apply changes. Setting Language Specify in which language menus and messages are to be displayed on the LCD monitor. 1. Use the navigation control to scroll through the list and select the desired language. 2. Press the OK button to confirm and apply settings. Setting Display Mode This function controls the icon display on LCD monitor for both Record mode and Playback mode. Available settings are: On, Detailed, Off. If set Display Mode to Off, the mode icon and remaining shots will display for 2 seconds in following situations: • Power on the camera • Switch from Playback to Record mode • After shooting • Close the menu and back to preview 57