HP t520 Administrator Guide 5 - Page 73
Setting up printer ports, Installing printers on the server, VMware Horizon View-Navigate
View all HP t520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Setting up printer ports 1. In the Profile Editor, select Registry, and then enable the Show all settings checkbox. 2. Enable printer port mapping for your connection type: ● Citrix-No action is required. ● RDP-Navigate to root > ConnectionType > freerdp. Right-click on the connections folder, select New connection, and then click OK. Set the portMapping registry key to 1 to enable printer port mapping. ● VMware Horizon View-Navigate to root > ConnectionType > view. Right-click on the connections folder, select New connection, and then click OK. Under the xfreerdpOptions folder, set the portMapping registry key to 1 to enable printer port mapping. 3. Navigate to root > Serial. Right-click the Serial folder, select New UUID, and then click OK. 4. Under the new directory, set the baud, dataBits, flow, and parity values to the ones obtained in Obtaining the printer settings on page 60. Set the device value to the port the printer will be plugged into. For example, the first serial port would be /dev/ttyS0, the second serial port would be /dev/ttyS1, and so on. For USB serial printers, use the format /dev/ttyUSB#, where # is the number of the port, starting with 0. Installing printers on the server 1. On the Windows desktop, select Start > Printers and Faxes. 2. Select Add Printer, and then click Next. 3. Select Local Printer attached to this Computer and, if required, deselect Automatically detect and install my Plug and Play printer. 4. When completed, click Next. 5. In the menu, select a port. NOTE: The port you need is in the section of ports labeled TS###, where ### is a number between 000-009, 033-044. The appropriate port depends on your hostname and the printer you want to install. For example, with a hostname of ZTAHENAKOS and a serial printer, select the port with (ZTAHENAKOS:COM1). For a parallel printer, select (ZTAHENAKOS:LPT1). The TS### is assigned by the server, so it will not be the same every time. 6. Select the manufacturer and driver for your printer. TIP: If desired, use the driver disc Windows Update to install the driver. NOTE: For basic or test printing, the Generic Manufacturer or Generic/Text Only printer usually works. 7. If prompted to keep the existing driver and it is known to work, keep it, and then click Next. 8. Assign a name to the printer. To use it as the default printer, select Yes, and then click Next. 9. To share the printer, select Share name and assign it a share name. Otherwise, click Next. 10. On the next page, you may request a test print. HP recommends this because it will verify the printer setup is correct. If it is not set up properly, review the settings and try again. NOTE: If the client disconnects from the server, the printer will need to be set up again the next time the client connects. Configuring a serial or parallel printer 61