HP t5630 Using the HP DHCP Settings Update Client - Page 8

Command Line Syntax For local file-based processing, use the following command line syntax: C:\Windows\XPePrep.exe For example: C:\Windows\XPePrep.exe c:\xpeprep.ini. You must specify the full path to the .INI file. This command line cannot be a relative path. For DHCP FTP-based processing, use the following command line syntax: C:\Windows\XPePrep.exe Input File Parameters The following tables list input file parameters for [Display], [GUIUnattended], [Userdata], [Internet], and [XpePrep]. [Display] Setting BitsPerPel = INT Vrefresh = INT Xresolution = INT Yresolution = INT Description This setting specifies color depth in bits per pixel. Possible values could be 4, 8, 16, 24, or 32 depending on video driver/monitor support. This setting will be ignored if not specified. This setting specifies refresh rate in Hertz of the display adapter. Possible values could be 0, 65, 70, 72, etc. depending on the monitor/video adapter. This setting specifies horizontal resolution of the display. This setting will be ignored if not specified. This setting specifies vertical resolution of the display. This setting will be ignored if not specified. If the system has multiple monitors, the same settings will be applied to all monitors. Specifying a setting that the monitor and/or graphics card does not support will prevent the device from operating. 8